Descripción del producto
The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.
A separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
Compatible with PoE Module 12V (X000002).
Ficha técnica
Voltaje de Operación | 5V DC |
Microcontrolador | ATmega 328 |
Voltaje de Entrada | 7V a 12V(recomendado) / 6V a 20V(limite) |
Voltaje Entrada POE | 36V a 57V(limite) |
Digital I/O pines | 14 (of which 4 provide PWM output) |
Analogo input pines | 6 |
Corriente I/O pines | 40 mA |
Memoria Flash | 32 KB (ATmega328) of which 0.5 KB used by bootloader |
SRAM | 2 KB (ATmega328) |
EEPROM | 1 KB (ATmega328) |
Pines Reservados | 10 to 13 used for SPI ; 4 used for SD card ; 2 W5100 interrupt (when bridged) |
Frecuencia del Crystal | 16 Mhz |
Otros | W5100 TCP/IP Embedded Ethernet Controller ; Power Over Ethernet ready Magnetic Jack ; Micro SD card, with active voltage translators |
Valoraciones
No hay valoraciones aún.