BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian
BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian3BeagleBone Black Rev C - 4GB Flash - Pre-installed Debian2

BeagleBone Black Rev C – 4GB Flash

S/195.00

Descripción del producto

The BBB manual has lots of starting information and pointers for getting the most of your BeagleBone Black

As of May 12, 2014 the BBB comes with Debian Linux w/the 3.8.13-bone kernel

  • Processor: Sitara AM3358BZCZ100 1GHz, 2000 MIPS
  • Graphics Engine: SGX530 3D, 20M Polygons/S
  • SDRAM Memory: 512MB DDR3L 606MHZ
  • Onboard Flash: 4GB, 8bit Embedded MMC
  • PMIC: TPS65217C PMIC regulator and one additional LDO.
  • Debug Support: Optional Onboard 20-pin CTI JTAG, Serial Header
  • Power Source: miniUSB USB or DC Jack, 5VDC External Via Expansion Header
  • PCB: 86.44mm x 54.54mm / 3.4” x 2.15” 6 layers
  • 88.98mm x 54.54mm x 15.41mm / 3.5″ x 2.15″ x 0.6″
  • Indicators 1-Power, 2-Ethernet, 4-User Controllable LEDs
  • HiSpeed USB 2.0 Client Port: Access to USB0, Client mode via miniUSB
  • HiSpeed USB 2.0 Host Port Access to USB1, Type A Socket, 500mA LS/FS/HS
  • Serial Port UART0 access via 6 pin 3.3V TTL Header. Header is populated
  • Ethernet 10/100, RJ45
  • SD/MMC Connector microSD , 3.3V
  • User Input: Reset Button, Boot Button, Power Button
  • Video Out: 16b HDMI, 1280×1024 (MAX), 1024×768,1280×720,1440×900 w/EDID Support
  • Audio Via HDMI Interface, Stereo
  • Expansion Connectors:
    • Power 5V, 3.3V , VDD_ADC(1.8V)
    • 3.3V I/O on all signals
    • McASP0, SPI1, I2C, GPIO(65), LCD, GPMC, MMC1, MMC2, 7 AIN(1.8V MAX), 4 Timers, 3 Serial Ports, CAN0, EHRPWM(0,2),XDMA Interrupt, Power button, Expansion Board ID (Up to 4 can be stacked)
  • Weight 40.55g / 1.43oz

For all technical issues, replacement and warranty assistance for the CircuitCo BeagleBone Black contact CircuitCo

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “BeagleBone Black Rev C – 4GB Flash”

Tu dirección de correo electrónico no será publicada.