FX-79 Buffalo FPV Flying Wing EPO Airplane 2000mm (PNF)-2
FX-79 Buffalo FPV Flying Wing EPO Airplane 2000mm (PNF)-2FX-79 Buffalo FPV Flying Wing EPO Airplane 2000mm (PNF)-2FX-79 Buffalo FPV Flying Wing EPO Airplane 2000mm (PNF)-2

FX-79 Buffalo FPV Flying Wing EPO Airpla...


Warning: sizeof(): Parameter must be an array or an object that implements Countable in /homepages/19/d776646349/htdocs/clickandbuilds/IDIElectronica/wp-content/plugins/woocommerce/templates/single-product/meta.php on line 26
Categorías: ,

Descripción del producto

The FX-79 Buffalo is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use. It is the bigger brother to the massively popular FX-61 Phantom.

The Buffalo features tough EPO construction with moulded in camera bays – one forward looking just under the nose and another mount in the top of the canopy. This larger version features premium 3K wrapped carbon tube spars, and breaks down into three pieces for easy transport.

Assembly of the airframe is quite simple,  just  a few parts to glue, install your radio equipment and fly. The FX-79 features optional inboard flaps with molded pockets ready to accept your servos.

FPV pilots will appreciate the space under the canopy – it’s cavernous! There is plenty of space for your choice FPV gear. The central equipment bay dimensions listed in the specs is only part of the actual space. Additional side pockets are molded in allowing you to move your FPVantennas farther away from your main radio control antennas reducing the chance of interference from the different systems.

• Plug and fly – just add electronics, battery, and enjoy
• Ultra though EPO construction
• Ultra stable flight performance
• Excellent FPV platform
• Plug in outer wing panels for easy transport
• Easy to Hand Launch, Easy to Land
• Stable Handling at Low and High Speeds
• 3K wrapped carbon tube spars
• Outer fuselage pockets designed to separate FPV equipment from radio control equipment

Wingspan: 2000mm
Length: 862mm 
Weight: 1200g (W/o battery)
Servos: 2 x 9g metal gear
ESC: 50 amp brushless
Motor: Y3542 850Kv Outrunner
Prop: 12×6
Battery/FPV Equipment Compartment Dimensions: 250x140x90mm

4 Channel Radio (with delta mixing)
3S~4S 11.1V/14.8V 5000~10000mAh Lipoly battery


No hay valoraciones aún.

Sé el primero en valorar “FX-79 Buffalo FPV Flying Wing EPO Airpla...”